Posted: Fri Nov 23, 2007 10:24 pm Post subject: TextEdit Control
TIP: Use SE75 to create your own custom text ID for SAVE_TEXT object
Example 1: Creating the TextEdit control
Example 2: Event handling - Application event
Example 3: Event handling - System event
Example 4: Calling a methods of the control
Example 5: Responding to an event
Example 6: Protect a line in the TextEdit control and the importance of FLUSH
Example 7: Using multiple controls
See the whole program code
Example 1: Creating the TextEdit control
This is a simple example of how to implement a text edit control.
Steps
Create a report
In the start of selection event add: SET SCREEN '100'.
Create screen 100
Place a custom control on the screen by choosing the custom control icon which can be recognized by the letter 'C', and give it the name MYCONTAINER1.
To be able to exit the program, add a pushbutton with the function code EXIT.
In the elements list enter the name OK_CODE for the element of type OK.
Code:
REPORT sapmz_hf_controls1 .
CONSTANTS:
line_length TYPE i VALUE 254.
DATA: ok_code LIKE sy-ucomm.
DATA:
* Create reference to the custom container
custom_container TYPE REF TO cl_gui_custom_container,
* Create reference to the TextEdit control
editor TYPE REF TO cl_gui_textedit,
repid LIKE sy-repid.
START-OF-SELECTION.
SET SCREEN '100'.
*---------------------------------------------------------------------*
MODULE status_0100 OUTPUT.
* The TextEdit control should only be initialized the first time the
* PBO module executes
IF editor IS INITIAL.
repid = sy-repid.
* Create obejct for custom container
CREATE OBJECT custom_container
EXPORTING
container_name = 'MYCONTAINER1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Create obejct for the TextEditor control
CREATE OBJECT editor
EXPORTING
wordwrap_mode =
cl_gui_textedit=>wordwrap_at_fixed_position
wordwrap_position = line_length
wordwrap_to_linebreak_mode = cl_gui_textedit=>true
parent = custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
gui_type_not_supported = 5
others = 6
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
Example 2: Event handling - Application event
There are 2 types of events:
System events. These events are triggerede irrespective of the screen flow-logic.
Application events. The PAI module is processed after an event. The method CL_GUI_CFW=>DISPATCH must be called to initiate event handling
In this example an application event is added to the program in example 1. New code is marked with red.
Steps:
Create an input/output field on screen 100, where the event type can be output. Name it EVENT_TYPE
Code:
REPORT sapmz_hf_controls1 .
CONSTANTS:
line_length TYPE i VALUE 254.
DATA: ok_code LIKE sy-ucomm.
DATA:
* Create reference to the custom container
custom_container TYPE REF TO cl_gui_custom_container,
* Create reference to the TextEdit control
editor TYPE REF TO cl_gui_textedit,
repid LIKE sy-repid.
**********************************************************************
* Impmenting events
**********************************************************************
DATA:
event_type(20) TYPE c,
* Internal table for events that should be registred
i_events TYPE cntl_simple_events,
* Structure for oneline of the table
wa_events TYPE cntl_simple_event.
*---------------------------------------------------------------------*
* CLASS lcl_event_handler DEFINITION
*---------------------------------------------------------------------*
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
catch_dblclick FOR EVENT dblclick
OF cl_gui_textedit IMPORTING sender.
ENDCLASS.
CLASS lcl_event_handler IMPLEMENTATION.
START-OF-SELECTION.
CLEAR wa_events. refresh i_events.
SET SCREEN '100'.
*---------------------------------------------------------------------*
* MODULE USER_COMMAND_0100 INPUT *
*---------------------------------------------------------------------*
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN OTHERS.
* Call the Dispacth method to initiate application event handling
call method cl_gui_cfw=>Dispatch.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*&---------------------------------------------------------------------*
*& Module STATUS_0100 OUTPUT
*&---------------------------------------------------------------------*
MODULE status_0100 OUTPUT.
* The TextEdit control shoul only be initialized the first time the
* PBO module executes
IF editor IS INITIAL.
repid = sy-repid.
* Create obejct for custom container
CREATE OBJECT custom_container
EXPORTING
container_name = 'MYCONTAINER1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Create obejct for the TextEditor control
CREATE OBJECT editor
EXPORTING
wordwrap_mode =
cl_gui_textedit=>wordwrap_at_fixed_position
wordwrap_position = line_length
wordwrap_to_linebreak_mode = cl_gui_textedit=>true
parent = custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
gui_type_not_supported = 5
others = 6
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Link the event handler method to the event and the
* TextEdit control
SET HANDLER lcl_event_handler=>catch_dblclick FOR editor.
* Register the event in the internal table i_events
wa_events-eventid = cl_gui_textedit=>event_double_click.
wa_events-appl_event = 'X'. "This is an application event
append wa_events to i_events.
* Pass the table to the TextEdit control using method
* set_registred_events
call method editor->set_registered_events
exporting events = i_events.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
Result:
When you double click on the TextEdit control, the input/ouput field should show the text: Event DBLCLICK
Example 3: Event handling - System event
System events are passed irrespective of the flow-logic of the screen. To implement a system event change the code from example 2 as follows:
Code:
CLASS lcl_event_handler IMPLEMENTATION.
METHOD catch_dblclick.
*--- event_type = 'Event DBLCLICK raised'.
* Reacting to the system event
call method cl_gui_cfw=>set_new_ok_code
exporting new_code = 'SHOW'.
MODULE user_command_0100 INPUT.
CASE ok_code.
code.........
WHEN 'SHOW'.
event_type = 'System dblclick'.
WHEN OTHERS.
*---- call method cl_gui_cfw=>Dispatch.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
MODULE status_0100 OUTPUT.
Code ................
*--- wa_events-appl_event = 'X'. "This is an application event
wa_events-appl_event = space. "This is a system event
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
Result:
When you double clicks on the TextEdit control nothing happens, since the flow-logic of the screen and the fielde transport is ignore.
Example 4: Calling methods of the control
In this exercise a function that loads the texts of an internal table into the text window, is implemented.
Steps:
Define anoterh pushbutton on the screen, that activates the method that fills the TextEdit control. Give itname PUSHBUTTON_IMPORT and function code IMP.
Define a form CREATE_TEXTS that carries out the text import.
Only changes to the code in example 2 is show.
Code:
MODULE user_command_0100 INPUT.
CASE ok_code.
code.........
WHEN 'IMP'.
perform load_texts.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*&---------------------------------------------------------------------*
*& Form load_texts
*&---------------------------------------------------------------------*
* This form creates an internal table with texts. The the contents of
* the table is instered into the TextEdit control using method
* set_text_as_r3table
*----------------------------------------------------------------------*
FORM load_texts.
TYPES:
BEGIN OF t_texttable,
line(line_length) TYPE c,
END OF t_texttable.
DATA
i_texttable TYPE TABLE OF t_texttable.
* Create internal table with texts
APPEND 'This a method that fills the TextEdit control' TO i_texttable.
APPEND 'with a text.' TO i_texttable.
DO 10 TIMES.
APPEND 'hallo world !' TO i_texttable.
ENDDO.
* Load TextEdit control with texts
CALL METHOD editor->set_text_as_r3table
EXPORTING table = i_texttable.
IF sy-subrc > 0.
* Display an error message
EXIT.
ENDIF.
* All methods that operates on controls are transferred to the frontend
* by a RFC calls. the method FLUSH is used to determine when this is done.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc > 0.
* Display an error message
ENDIF.
ENDFORM. " create_texts
Example 5: Responding to an event
When you double click on a text line in the TextEdit control, you want it to be prefixed with a '*'.
The line number of the TextEdit control that is double clicked, is retreived using method GET_SELECTION_POS. The internal text table is reloaded froim the TextEdit control with method GET_TEXT_AS_R3TABLE. The position of the double click in the TextEdit control is used to find the entry in the table, and the entry is prefixed with '*' and loaded into the TextEdit control again.
The program should be changed so that the internal table i_texttable is global, and a global flag g_loaded added. The load of the table should be moved to the PBO module. The changes in thje code are marked with red. The whole program now looks like this:
Code:
REPORT sapmz_hf_controls1 .
CONSTANTS:
line_length TYPE i VALUE 254.
DATA: ok_code LIKE sy-ucomm.
DATA:
* Create reference to the custom container
custom_container TYPE REF TO cl_gui_custom_container,
* Create reference to the TextEdit control
editor TYPE REF TO cl_gui_textedit,
repid LIKE sy-repid.
**********************************************************************
* Utillity table to load texts
**********************************************************************
TYPES:
BEGIN OF t_texttable,
line(line_length) TYPE c,
END OF t_texttable.
DATA:
i_texttable TYPE TABLE OF t_texttable,
g_loaded(1) TYPE c.
**********************************************************************
* Impmenting events
**********************************************************************
DATA:
event_type(20) TYPE c,
* Internal table for events that should be registred
i_events TYPE cntl_simple_events,
* Structure for oneline of the table
wa_events TYPE cntl_simple_event.
*---------------------------------------------------------------------*
* CLASS lcl_event_handler DEFINITION
*---------------------------------------------------------------------*
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
catch_dblclick FOR EVENT dblclick
OF cl_gui_textedit IMPORTING sender.
ENDCLASS.
CLASS lcl_event_handler IMPLEMENTATION.
METHOD catch_dblclick.
DATA:
from_line TYPE i,
from_pos TYPE i,
to_line TYPE i,
to_pos TYPE i,
wa_texttable TYPE t_texttable.
* Used for the sytem event
call method cl_gui_cfw=>set_new_ok_code
exporting new_code = 'SHOW'.
* Read the position of the double click
CALL METHOD sender->get_selection_pos
IMPORTING
from_line = from_line
from_pos = from_pos
to_line = to_line
to_pos = to_pos.
* Texts in the TextEdit control can have been changed, so
* first reload text from the control into the internal
* table that contains text
IF NOT g_loaded IS INITIAL.
CALL METHOD sender->get_text_as_r3table
IMPORTING table = i_texttable.
* Read the line of the internal table that was clicked
READ TABLE i_texttable INDEX from_line INTO wa_texttable.
IF sy-subrc <> 0.
EXIT.
ENDIF.
IF wa_texttable+0(1) CS '*'.
SHIFT wa_texttable.
ELSEIF wa_texttable+0(1) NS '*'.
SHIFT wa_texttable RIGHT.
wa_texttable+0(1) = '*'.
ENDIF.
modify i_texttable from wa_texttable index from_line.
* Reload texts from h einternal table
perform load_texts.
ENDIF.
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
CLEAR wa_events.
REFRESH: i_events.
SET SCREEN '100'.
*---------------------------------------------------------------------*
* MODULE USER_COMMAND_0100 INPUT *
*---------------------------------------------------------------------*
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'SHOW'.
event_type = 'System dblclick'.
WHEN 'IMP'.
PERFORM Load_texts.
WHEN OTHERS.
* CALL METHOD cl_gui_cfw=>dispatch. "Not used for system events
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*&---------------------------------------------------------------------*
*& Module STATUS_0100 OUTPUT
*&---------------------------------------------------------------------*
MODULE status_0100 OUTPUT.
* The TextEdit control shoul only be initialized the first time the
* PBO module executes
IF editor IS INITIAL.
repid = sy-repid.
* Create object for custom container
CREATE OBJECT custom_container
EXPORTING
container_name = 'MYCONTAINER1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Create obejct for the TextEditor control
CREATE OBJECT editor
EXPORTING
wordwrap_mode =
cl_gui_textedit=>wordwrap_at_fixed_position
wordwrap_position = line_length
wordwrap_to_linebreak_mode = cl_gui_textedit=>true
parent = custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
gui_type_not_supported = 5
others = 6
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Link the event handler method to the event and the
* TextEdit control
SET HANDLER lcl_event_handler=>catch_dblclick FOR editor.
* Register the event in the internal table i_events
wa_events-eventid = cl_gui_textedit=>event_double_click.
* wa_events-appl_event = 'X'. "This is an application event
wa_events-appl_event = space. "This is a system event
APPEND wa_events TO i_events.
* Pass the table to the TextEdit control uding method
* set_registred_events
CALL METHOD editor->set_registered_events
EXPORTING events = i_events.
* Create internal table with texts taht can be uploaded to
* the TextEdit control
APPEND 'This a method that fills the TextEdit control' TO i_texttable.
APPEND 'with a text.' TO i_texttable.
DO 10 TIMES.
APPEND 'hallo world !' TO i_texttable.
ENDDO.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*&---------------------------------------------------------------------*
*& Form Load_texts
*&---------------------------------------------------------------------*
* This form loads the lines of the internal table i_texttable into
* the TextEdit control
*----------------------------------------------------------------------*
FORM Load_texts.
* Load TextEdit control with texts
CALL METHOD editor->set_text_as_r3table
EXPORTING table = i_texttable.
IF sy-subrc > 0.
* Display an error message
EXIT.
ENDIF.
* All methods that operates on controls are transferred to the frontend
* by a RFC calls. the method FLUSH is used to determine when this is
* done.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc > 0.
* Display an error message
ENDIF.
g_loaded = 'X'.
ENDFORM. " create_texts
Example 6: Protect a line in the TextEdit control and the importance of FLUSH
All methods that operates on controls are transfered to the fronend by RFC calls. The FLUSH method is used to synchronize control execution and the frontend. This is very important when working e.g. with export parameters from a method, as the parmeters will not be correct before the FLUSH method has been called.
The example below portects selected lines in the TextEdit and uses FLUSH to ensure that the correct parameters are returned from method GET_SELECTION_POS.
Note: Instead of using method PROTECT_LINES, the method PROTECT_SELECTION could be used. This method does not need line numbers or a FLUSH statement
Steps
Add a new pushbutton to the screen with the function code PROTECT.
Add the following code to the example:
Code:
* Global variables
DATA:
from_idx TYPE i,
to_idx TYPE i,
index TYPE i.
MODULE user_command_0100 INPUT.
CASE ok_code.
code.......................
WHEN 'PROTECT'.
PERFORM protect.
.......................
ENDCASE.
*&---------------------------------------------------------------------*
*& Form protect
*&---------------------------------------------------------------------*
* Protects marked lines in a TextEdit control
*----------------------------------------------------------------------*
FORM protect.
* Determine the area selected by the user
CALL METHOD editor->get_selection_pos
IMPORTING
from_line = from_idx
to_line = to_idx
EXCEPTIONS
error_cntl_call_method = 1.
* Synchronize execution in the control with the ABAP program.
* Without this synchronization the variables from_idx and
* to_idx will have obsolutete values (The initial value for
* both, are 0)
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc > 0.
* Errormessage: Error in flush
ENDIF.
* Protect the selected lines
IF to_idx > from_idx.
to_idx = to_idx - 1.
ENDIF.
CALL METHOD editor->protect_lines
EXPORTING
from_line = from_idx
to_line = to_idx.
* The PROTECT_SELECTION method could be used instead, eliminating the
* need of line numbers and the last FLUSH
* call method editor->protect_selection.
* Flush again to protect immidiately
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc > 0.
* Errormessage: Error in flush
ENDIF.
ENDFORM. " protect
Example 7: Using multiple controls
In this example a second TextEdit control will be added to the screen. The new TextEdit control will be designed to act as a clipboard for short texts.
Steps:
Add a new container to the screen and name it MYCONTAINER2.
Code:
Insert global datadeclaration:
**********************************************************************
* Implementing a second Scratch TextEdit control
**********************************************************************
DATA:
scratch TYPE REF TO cl_gui_textedit,
custom_container2 TYPE REF TO cl_gui_custom_container.
Insert the following code in the PBO module:
*------------------------------------------------------
* The SCRATCH TextEdit control
*------------------------------------------------------
IF scratch IS INITIAL.
* Create obejct for custom container2
CREATE OBJECT custom_container2
EXPORTING
container_name = 'MYCONTAINER2'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Create obejct for the SCRATCH TextEditor control
CREATE OBJECT scratch
EXPORTING
parent = custom_container2
wordwrap_mode =
cl_gui_textedit=>wordwrap_at_windowborder
wordwrap_to_linebreak_mode = cl_gui_textedit=>true.
* Remove the staus bar
CALL METHOD scratch->set_statusbar_mode
EXPORTING statusbar_mode = cl_gui_textedit=>false.
ENDIF.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
All product names are trademarks of their respective companies. SAPNET.RU websites are in no way affiliated with SAP AG. SAP, SAP R/3, R/3 software, mySAP, ABAP, BAPI, xApps, SAP NetWeaver and any other are registered trademarks of SAP AG. Every effort is made to ensure content integrity. Use information on this site at your own risk.
